English Spring Water bottled at source in Penning. These innovative one-trip bottles are delivered by courier and have a cap that fits perfectly on water coolers.

The bottles are made from PET, so are 100% recyclable. Once finished with, they can simply be crushed and popped straight into the recycle bin.

Typical Composition in MG/L
Calcium:	92.0
Magnesium:	1.0
Sodium:	7.0
Potassium:	0.3
Nitrates:	15
Iron:	<0.02
Chloride	14
pH	7.5

]]> http://www.thewatercoolercompany.com/3300-Series-Dream-Floor-Standing-Water-Cooler_p_78.html Mon, 20 May 2013 00:00:00 EST Sturdy, reliable, floor-standing water cooler with metal sides and anthracite, plastic front panels. Durable, push-lever taps made from ABS plastic. Integrated cup dispenser for 7oz and 9oz cups.Dimensions (mm): 340(w) x 340(d) x 1135(h)Tap to Drip T...[Read More]
Our Price: £295.00 [Add to Cart]

Sturdy, reliable, floor-standing water cooler with metal sides and anthracite, plastic front panels. Durable, push-lever taps made from ABS plastic. Integrated cup dispenser for 7oz and 9oz cups.Dimensions (mm): 340(w) x 340(d) x 1135(h)Tap to Drip T...[Read More]
Our Price: £295.00 [Add to Cart]

]]>

• Dimensions(mm): 410(w) x 210(d) x 290(h)
• Electrical: 220V ~ 240V, 50/60Hz
• Refrigerant: R134a
• Cold Water Tank: Stainless steel, 1.8 litres
• Inlet / Outlet: 1/4" OD stainless steel tube
• Temperature control: adjustable thermostat (2C ~ 12C)
• Certifications: CE

• Dimensions (mm): 325(w) x 365(d) x 1060(h)
• Tap to Drip Tray (mm): 210
• Tank Capacity: Cold 3.5L, Hot 2L
• Extraction Rate:
• Power Requirement: 220 ~ 240V AC 50Hz
• Power Consumption: Cold 95W, Hot 545W
• Refrigerant: R134a
• Weight: 18kg
• Certification: CE, WRAS

• Dimensions (mm): 305(w) x 312(d) x 980(h)
• Tap to Drip Tray (mm):
• Tank Capacity: 3.2L Cold, 2L Hot
• Extraction Rate:
• Power Requirement: 220 ~ 240V AC 50/60Hz
• Power Consumption: 74W Cold, 450W Hot
• Refrigerant: R134a
• Weight: 18kg
• Certification: CE, UL

• Dimensions (mm): 334(w) x 353(d) x 1030(h)
• Tap to Drip Tray (mm):
• Tank Capacity: 3.9L Cold, 1.9L Hot
• Extraction Rate:
• Power Requirement: 220 ~ 240V AC 50/60Hz
• Power Consumption: 100W Cold, 450W Hot
• Refrigerant: R134a
• Weight: 18kg
• Certification: CE, WRAS

The F100 Non-Refrigerated Drinking Fountain is a single level unit with a Dial-A-Drink Bubbler

Features and Benefits

• Waterways are Lead-Free in Materials and Construction
• Dial-A-Drink® Bubbler
• Stainless Steel Surfaces
• Anti-Splash Ridge
• Easy-To-Clean Integral Stainer Grid
• Bottom Cover Plate

Suggested Specifcation

Model F100 is a non-refrigerated drinking fountain. Cabinet finish shall be brushed stainless steel. Shall be listed by Underwriters Laboratories to U.S. and Canadian standards and conform to European Union Directives.

Finishes

• Standard Cabinet Finish: Stainless Steel
• Optional Cabinet Finish at extra cost: Regency Bronze

• Sturdy and robust wall mounted option
• Option of adding a bottle filler (swan neck tap)
• Water dispensed through bubbler at the front of the unit.
• Drip tray drains to waste
• Purchase options available by calling us on 0845 500 4455 .

Specifications

• Dimensions (mm): 457(w) x 368(d) x 559(h)
• Manufacturers Mounting Height (guide): 1016 mm for adults, 838 mm for children
• Cabinet: Stainless Steel
• Basin: One piece, polished, stainless steel top
• Bubbler: Elkay Flexi-Guard Safety Bubbler. Utilises an infused anti-microbial pliable polyester elastomer to prevent accidental mouth injuries.
• Cooling system: Non-pressurised tank system. Water tank is situated after the bubbler valve, so is only subject to line pressure when the valve button is pressed.
• Cooling capacity: 30L per hour
• Power requirement: 220 ~ 240V, 50Hz
• Power Consumption:
• Refrigerant: R134a
• Weight: 27kg
• Certification: NSF, UL

This water cooler is available in 'room temperature and cold' or 'hot and cold' (with child safety taps).

• Cabinet - Cold-rolled 20 gauge embossed steel with baked on acrylic enamel finish.
• Drip Tray - Lift out design which can be connected to mains drainage, High impact durable plastic. removable anti splash grid.
• Taps - Push type. Made of high impact durable ABS. Easy to remove and clean.
• Integral Cup Holder - Integrated cup holder with exposed locking nuts to open up for easy refilling of cups.
• Removable lower front panel - Spring loaded lower front panel. Remove drip tray and simply press down to remove entire lower front panel for easy access.
• Refrigeration System - Quiet, air cooled static-type condenser. No fan required. Protected against motor overload. Unit hermetically sealed. R-134a refrigerant.
• Cooling System - Stainless Steel 3 litre cold water tank. Thermostatically controlled to 4C - 12C.
• Heating System - Stainless Steel 2 litre tank. Thermostatically controlled to between 87 and 92?C. Designed to prevent total drainage for heating element protection.Easily accessible hot water tank drain at the back of the Cooler.

• Modern Push & Hold solenoid button dispeners
• Integrated Cup Holder
• Innovative Silver impregnated Hygiene Guard Tap cover designed to stop bacterial growth
• Available in stylish Anthracite & Silver Livery
• Choice of Chilled/Ambient or Hot/Cold in Upright or Counter Top Models
• Thermostatically controlled to Cold: 4 - 12 c / Hot: 87 - 92c

Dimensions

Upright: 340 (w) x 1010 (h) x 340 (d) mm

The Archway bottled water cooler is available as room temperature and cold or hot and cold. The hot and cold version has child safety hot taps.

This water cooler is available in 'room temperature and cold' or 'hot and cold' (with child safety taps).

Click to view cooler information PDF (opens in new window)

Colour - Available in brushed stainless steel.TechnologyThis water cooler has a compressor within the cooler. This means that it has a high capacity for both chilling and heating the water quickly.DimensionsFloor standing Cooler - 97 cm H, 30cm W, 30.5 cm D
Floor standing w/19 litre - 137 cm H, 30cm W, 30.5cm DWater SupplyCommercial Bottles (12 litre and 19 litre) sit on top. These bottles are delivered by water cooler companies on a regular basis.Capacity3 litre cold tank – Up to 15 litres of chilled water per hour.
2 litre hot tank – Up to 7 litres of hot water per hour.PricingRoom temperature and cold floorstanding

It’s time for a new way to think about water at home. It’s time to say Hello to BIBO.

BIBO is a multi-stage water filtration system that dispenses instant boiling and chilled water. Designed specifically for the UK kitchen, it sits discreetly on the work surface and fits neatly under all overhead kitchen cupboard

The Bibo water cooler's dimensions are 30cm wide, 35cm deep and 32.5cm high.]]> http://www.thewatercoolercompany.com/Bibo-Bar-Water-Cooler-_p_343.html Mon, 20 May 2013 00:00:00 EST It’s time for a new way to think about water at home. It’s time to say Hello to the BIBO Bar water cooler. All have a black fascia, front panel & lid, and the side panels are available in silver, black or cream. BIBO is a multi-stage water filtration...[Read More]
Our Price: £399.00 [Add to Cart]

It’s time for a new way to think about water at home. It’s time to say Hello to the BIBO Bar water cooler. All have a black fascia, front panel & lid, and the side panels are available in silver, black or cream. BIBO is a multi-stage water filtration...[Read More]
Our Price: £399.00 [Add to Cart]

]]>